EZ Mister

Patio Mister Demo, 1':20"

Enjoy your patio any time during the day! On a hot summer day, a mister would drop the outdoor temperature by up to 25 degrees F (depending on your water pressure), which would allow you to enjoy your backyard even during noon hours.

We offer two EZ Mister kits for Patio applications. One has 10 nozzles and the other one has 5, however you could expand your set using one or multiple extension kit(s), which have 5 nozzles each.

Installing the EZ Mister as the name implies, is very easy! Run the 1/4" tubing like a cable line, attach a quick-connect fitting with a nozzle every two feet, anchor the tubing using nail clamps, attach the garden hose adapter to your garden hose faucet, and turn on the water! That's all it takes.

The EZ Misters forms a barrier like a curtain, separating your patio from the the surrounding area.

Why escape the heat by moving indoors and turning on your air conditioning system, when you can cool down outdoors in your patio by turning on the EZ Mister. The cost of few gallons of water per hour is much less than the cost of your AC operating for the same period of time!

10-Nozzle Patio Mister Kit #M10PAT >

Features

• Drops Outdoor Temperature by up to 25 Degrees F
• Operates on City Water Pressure (45-200 psi)
• UV Resistant Against Sun’s Ultraviolet Rays
• Fully Quick-Connect Polypropylene Fittings
• NSF Standard 58/61 Certified Components
• Brass & Stainless Steel, PP Stem-Nozzles
• Versatile, with Many Different Applications
• Modular, Very Easy to Install & Expand
• Connects to Garden Hose or Faucet
• Leak Resistant Dual EPDM O-Rings
• Flexible Polyethylene Tubing
• Ideal for Custom Projects

Note: The above sizes can be expanded by using one or more 5-Nozzle Extension Mister Kit #M5EXT-N.

Nozzles Per PSI (Water Pressure)
The table below shows the number of misters that water pressure could handle to offer a decent mist (it also depends on available water flow rate).

* PSI = Pound per Square Inch

5-Nozzle Patio mister Kit #M5PAT >

• Normally, city water pressure supplied to residential houses ranges from 35 psi to 90 psi.
• The above chart works as long as you have enough water flow.
• A minimum of 45 psi is needed for decent misting (Note the above table), but 45 psi can handle only 2 nozzles.
• Below 45 psi the water particles tend to be much larger, and closer to a jet stream than a mist.
• People with well water normally have their water pressure at about 40 psi, if that is the case, then they need a booster pump.
• To test your water pressure, you can eitehr call your city water department, or go to Home Depot, and perchase a garden hose water pressure gauge, they are found at the plumbing department next to sprinklers, and cost about $8.00 - $9.00.

Other Residential Applications

Sliding Door Mister: If you don't have a patio, you can still install a mister along the edge of your roof, install it at the edge of your roof locating it above your sliding door and windows, this usually extends about 2' from your side wall. running the mister would cool down that side wall, especially when the sun is shining directly at it. It will cut down the cost of running your air conditioning system because it drops down the heat transfer.

Balcony Mister: If you live in an apartment with a balcony, you can use a Diverter Valve on your kitchen faucet to connect your mister tubing to, and enjoy your balcony on hot days. If you don't have a garden hose faucet in your balcony, you can order the Diverter Valve which would attach to your kitchen faucet (see Mister Parts section).

Frame Mister: If you are a handy person, you can easily put together a PVC pipe Frame and run your misters to form a cubical with your side wall misters.

General

• One main feature of our system is that we supply our tubing as a roll, (and not precut and preassembled as our competitors). This allows our customer to custom tailor their mister system to match their architectural layout.
• Each nozzle sprays a mist in a conical way that covers roughly two feet in diameter. Hence it is recommended that the distance between two fittings be two feet, for the most efficient setup.
• We supply the tubing in a roll, this allows you to customize your setup. Here is an example where our feature becomes very handy. Example: if there is a length of 6' in between that you don't want to mist, then you cut a tube length equal to 2' longer than the length you want to skip (i.e. 6' + 1' + 1'= 8'), where 1' is added to both ends since they will be covered by half the range of the misters before and after. Competitors offer 2' long precut, pre-assembled tubing, and that might results in waste some times, because with a precut tubing you are forced to waste misters in an area that you don't want to mist, and you might end up plugging them, yet you paid for those fittings. With our uncut tubing they can utilize those extra unused fittings in another location that you want to mist.
• You can takeoff a branch from a Tee, and split the misters into two lines. (Note: you will need an extra elbow for the second branch tube end).
• You can customize your mister by selecting fittings that match your own needs. See our Mister Parts section for details.
• If you have hard water, you need a lime reduction Filter #MF6PG, Otherwise the orifices of your nozzles will get clogged in a short time.
• If you have high sediment levels in your water, you need a sediment reduction Filter #MF6S, Otherwise the orifices of your nozzles will get clogged in a short time.
• If you need extra Tubing or Fittings, you can conveniently add that to your order (see related sections).
• Our misting systems requires a minimum of 45 psi water pressure, depending on number of nozzles used, and amount of water flow.
• Our standard tubing color is Black because it is UV treated, to protect it from the sun's UV rays.

To view the Contents of each kit, or for more details, Click on a product Link or its icon below!

• «« Start
• « Prev
• 1
• Next »
• End »»